Golden Rule: Must disconnect from internet everytime before launching VCDS, else will say 'Interface not found'. Also, do NOT update the software. Read golden rule above? Download the current version of VCDS. If you have not yet downloaded VCDS, then click here to open our download page in a new window. Allow VCDS to install itself, but please do not install it in the Program Files tree! On Windows Vista, we strongly recommend installing VCDS in C:Ross-TechVCDS.
This article show a guide on how to configure VCDS diagnostic cable for you laptop
Preparation:
Procedures:
Connect the USB end of your USB Interface or the Serial end of your Serial Interface to the correct port on your PC. If your PC is further from the vehicle's diagnostic port than 6 feet,
connect an approved Extension Cable between the PC and the Interface.
If you are using a Serial Interface then you can proceed to step #4. If you are using a USB
Interface, a message like this should pop up:
The drivers many install automatically in Windows 7 or Vista. If you are using XP or W2000, click on the Found New Hardware message and the Found New Hardware Wizard should start up. If you are prompted with the choice, pick 'No, Not This Time' when asked if you want to connect to the Internet to search for drivers. Select 'Install the software automatically (Recommended)' then click [Next >]
The process should be automated but you may need to click 'Continue Anyway' part way through the process.
If, for some reason, you installed the USB Interface without following the above instructions, and VCDS does not work correctly, go into your PC's Device Manager while the USB Interface is connected.
You can find the Device Manager by right-clicking on My Computer in XP or on Computer in Vista or 7. Select Manage to bring up Computer Management. On the left side of the screen under System Tools, select Device Manager.
Vcds Interface Not Found
Find the 'VCDS Compatible USB Interface' or similar and delete it. It may be under 'Other Devices' or under 'Universal Serial Bus Controllers'. Next, unplug the USB Interface from your PC, wait 5 seconds and plug it back in.
New 2020 Bollywood Songs, Punjabi Songs, Dj Remix Mp3 Songs Download 320Kbps. 320Kbps Free MP3 Downloads Website Serving You Latest Songs and High Quality Dj Remix For Free. One Click Download - 48 Kbps - 128 Kbps - 320 Kbps. Temporary Pyar Adaab Kharoud 9.69 Mb Keh Len De Kaka 5.80 Mb Majha Block Prem Dhillon 9.54 Mb Pamma Jatt Korala Maan 8.22 Mb Sun Fer Khan Bhaini 7.39 Mb Tennu Ni Khabran Kaka 6.15 Mb Chithiyaan Karan Aujla 7.69 Mb Bai Bai Gulab Sidhu 10.50 Mb City Of Gold. Punjabi Wedding Songs Mashup MP3 Free Download. DJ Mix N; 03 December 2019; 204,593x plays; Download Wedding Punjabi Mashup DJ Mix N Bhangra Mix RedLeaf Punjab MP3 music file at 320kbps. Djpunjab 320kbps Mp3, Punjabi Mashup #3 2019 Non Stop DJ Hans Guri SIngh 320Kbps FHD 60 FPS (12.8MB) Mp3 Download, Get 5Taara-DiljitDosanjh-320Kbps-www.DjPunjab.Com Mp3 and MP4, Ranjha Dhol Remix Kaka Ft. Pendu Mania Remix🔥Download In 320kbps👇 Downloader, Djpunjab 320kbps Download Free from Mp3Juice.
Connect the car end of your Interface to your vehicle's Diagnostic Port.
If your vehicle has a 2×2 port (some pre-1996 vehicles), then use the optional 2×2 Adapter between the Interface and the ports in the car. This is included in the Pro-Kit.
Turn the vehicle's ignition switch to the ON position. Make sure the key is turned far enough that the dash lights are fully illuminated. The engine may either be running or stopped.
Vcds Usb Interface Not Found Within
Start the VCDS program on your PC through either the Start Menu or the VCDS icon on your Desktop.
From the Main Screen in VCDS click the [Options] button to go into the Options screen.
Once you are in the Options Screen,Select the correct port for your PC's USB Port (USB) or Serial Port (typically COM1 or COM2) and click the [Test] button. Ensure that VCDS finds your interface.
You should see a message like this:
If the Interface Status is 'Not Found!',check the connections at the car and PC.Make sure both are plugged in securely.Serial Interfaces get their power from the vehicle so they will not be recognized at all if not plugged into a car.
Adapter Type should always be 'RossTech' followed by the name of the Interface such as 'HEX-USB+CAN'.
Version indicates the firmware version of your Interface. It may be updated by new versions of VCDS, if so follow the prompts on the screen.
Connect the car end of your Interface to your vehicle's Diagnostic Port.
If your vehicle has a 2×2 port (some pre-1996 vehicles), then use the optional 2×2 Adapter between the Interface and the ports in the car. This is included in the Pro-Kit.
Turn the vehicle's ignition switch to the ON position. Make sure the key is turned far enough that the dash lights are fully illuminated. The engine may either be running or stopped.
Vcds Usb Interface Not Found Within
Start the VCDS program on your PC through either the Start Menu or the VCDS icon on your Desktop.
From the Main Screen in VCDS click the [Options] button to go into the Options screen.
Once you are in the Options Screen,Select the correct port for your PC's USB Port (USB) or Serial Port (typically COM1 or COM2) and click the [Test] button. Ensure that VCDS finds your interface.
You should see a message like this:
If the Interface Status is 'Not Found!',check the connections at the car and PC.Make sure both are plugged in securely.Serial Interfaces get their power from the vehicle so they will not be recognized at all if not plugged into a car.
Adapter Type should always be 'RossTech' followed by the name of the Interface such as 'HEX-USB+CAN'.
Version indicates the firmware version of your Interface. It may be updated by new versions of VCDS, if so follow the prompts on the screen.
Once you have tested successfully, click [OK] then click [Save] to apply this configuration,you will be returned to the Main Screen. Click on [Select] to view the Select Control Module Screen. Select one of your car's Control Modules such as Engine.
Note: Your car will not have all the Control Modules listed in VCDS, only the functional ones that were installed in your vehicle.
After VCDS has connected, click on [Fault Codes] to check for Fault Codes (DTCs).Repeat the process for each of your car's Control Modules.
Vcds Port Status Ok Interface Not Found Usb
Readers who read this article also read:
